The newest product from SpaceX, the Starlink series, is a new type of wireless connection that bypasses the need for an Internet Service Provider and connects directly to a satellite network. The result is one of the market’s best and most reliable network connection speeds. With the second generation of the kit comes the removal of the Ethernet port on the router. However, the Starlink Ethernet adapter’s introduction reintroduces the feature for those who would like it. So, how do you set it up? Read on!
Table of Contents
- What Is The Starlink Ethernet Adapter For?
- How Does The Starlink Ethernet Adapter Work?
- Do The Starlink Routers Have Ethernet Ports?
- How To Add An Ethernet Port To The Starlink Router
- How To Install The Starlink Ethernet Adapter
- Where Can I Order The Starlink Ethernet Adapter? How Much Does It Cost?
- Starlink Ethernet Adapter Alternatives
- Conclusion
What Is The Starlink Ethernet Adapter For?
Ethernet LAN to USB Network Adapter
The first generation Starlink kit featured a round dish, a power supply, and a Wi-Fi router with an Ethernet port. The port provided a way for people to expand their coverage at home. However, with the second generation, The manufacturers introduced the Starlink Ethernet Adapter as a replacement.
This was to cut costs and is now available at a one-off price of $25.
How Does The Starlink Ethernet Adapter Work?
A yellow cable connecting computer network cards
By allowing it to connect to Starlink Wi-Fi, the Starlink Ethernet adapter will enable users to extend the internet coverage in their houses. In this case, it works just like a Wi-Fi extender. However, the adapter has an ethernet port allowing you to connect an Ethernet cable.
This, in turn, gives you a lot more range and allows you to have internet access on wired devices such as laptops and smart TVs.
With the Bypass Mode provided in the Starlink app on your mobile phone, you can turn off all Wi-Fi functionality and use Ethernet. This dramatically speeds up the connection of the Ethernet.
Do The Starlink Routers Have Ethernet Ports?
The original routers that shipped with the authentic dish have Ethernet ports. However, in the interest of making the router fully waterproof and weatherproof, the second-generation routers shipped with no Ethernet ports. These are the ones that were sent with the rectangle dishes. Starlink, however, offers an Ethernet adapter that allows you to use Ethernet.
How To Add An Ethernet Port To The Starlink Router
A laptop and an ethernet adapter
The best way to add an Ethernet port to the second-generation Starlink router is by purchasing an Ethernet adapter.
To add an Ethernet port to your router, use the Ethernet adapter to link the dish and the router. You can do this by connecting the adapter to the router and the antenna to the Ethernet adapter.
This way, you can have an Ethernet network on your devices while still having the freedom of a Wi-Fi signal.
How To Install The Starlink Ethernet Adapter
Here’s how to connect your Starlink Ethernet Adapter:
- For starters, on the bottom of your router are two ports; one for the antenna and one for the power. Disconnect the smaller cable.
- Secondly, take your adapter (fashioned similarly to the antenna cable) and put it in the antenna port.
- The antenna cable will go on the other side of the adapter, where there is a parallel port.
- Finally, plug your Ethernet cable into the empty RJ45 Network LAN adapter port. A small click will inform you that the line is in place.
Now you can connect the other end of your Ethernet cable to your desired device.
Where Can I Order The Starlink Ethernet Adapter? How Much Does It Cost?
Different types of Wi-Fi routers
You can order the Starlink Ethernet Adapter through the official Starlink store, which costs about $25. It has a 30-day free trial with international shipping and returns shipping if you’re unsatisfied with it.
You can also buy it through third-party sources, although it retails at a relatively higher price. Therefore, you are better off buying it through the official Starlink site, although they may take a while to deliver.
Starlink Ethernet Adapter Alternatives
If the original Starlink adapter doesn’t tickle your fancy, then here are a few alternatives you can find online:
- BrosTrend AC1200 Wi-Fi to Ethernet AdapterBrosTrends AC1200 Wi-Fi 到以太网适配器
- Starlink Ethernet Adapters for Wired External Network适用于有线外部网络的星形链路以太网适配器
- Using this Dual Band Ethernet to Wireless Adapter, your Ethernet-enabled Devices can Access the Internet via Wireless Connection.
- Supports Smart TVs, Game Consoles, Blu-Ray Player, Network Printer, Raspberry Pi, Ethernet Switch or Computer, etc.
- No Driver Installation or Update is Needed.
- Up to 867Mbps on 5GWiFi or 300Mbps on 2.4GWiFi.
- This 5GHz Universal Wireless Adapter Works with Any 802.11ax/ac/a/b/g/n WiFi Router.
- Yes, it is a Starlink-produced product.
- All of the Starlink adapters are listed as new or used.
- Yes, it is specifically designed for the Starlink Satellite system.
Conclusion
In conclusion, the Starlink Ethernet Adapter is an excellent way to add back functionality to your router via Ethernets, even though the second-generation Starlink Dish routers removed the option. The ease of installation and relatively low prices make it an excellent long-term investment.
Hopefully, this article has helped you understand all the basics of the Starlink Ethernet Adapters and how to set them up. Get yours here, and don’t forget to contact us with any questions.
