Chimney Antenna Mount: Everything You Need to Know

If you’re looking for a reliable way to mount your antenna to the side of your chimney, look no further than a chimney antenna mount.

This mounting system offers many advantages over other types, such as improved radio reception, less maintenance required, and ease of installation.

In this blog post, we’ll discuss everything you need to know about chimney antenna mounts so that you can make an informed decision.

Table of Contents

What Is a Chimney Mount Bracket?

A chimney mount kit uses corner pieces and metal bands that wrap around the entire circumference of your chimney safely and securely.

The corner pieces are designed to fit snugly around your chimney, while the metal bands provide extra stability.

This mounting system ensures that your antenna stays in place and provides optimal signal reception.

Could a Chimney Strap Damage Your Chimney?

No — as long as you follow instructions carefully during installation and use the right materials, there’s no risk of damaging your chimney with this method.

However, if you don’t pay attention to the installation process or use subpar materials (like poor-quality corner pieces or metal bands), then some damage could be done to your chimney over time.

In other words, it’s important to do things right when installing this chimney mount.

Antenna with masts

Safe Chimney Antenna Mount Installation Tips

Read the Manual

Before attempting to install any antenna mount, make sure you read through the manual thoroughly.

It will provide you with all the information needed for proper installation and help prevent any potential damage from occurring during setup.

Observe the Climate

Check the weather forecast before installing, as rainy, snowy, or windy conditions can make it difficult to complete the job safely and securely.

Measure Twice, Install Once

Double-check your measurements for both straps before drilling any holes into the chimney. Making sure that both straps are correctly spaced apart is essential for a secure installation.

Place Straps Securely

When mounting a chimney antenna mount, it is advisable to place the top strap as high up on the chimney as possible. Also, place one bottom strap four feet below it or as far down the structure as possible.

If there is a projecting cap or crown on your chimney, ensure that you secure this strap directly underneath it to provide optimal stability for your installation.

Chimney-mounted dish

Chimney-mounted dish

Different Types of Chimney Straps Installation

1. Installing a chimney mast 10 feet above your chimney: 

Start by measuring the height of the chimney, then measure and mark points up the chimney that are 30 inches apart. 

Attach straps to each marked point, ensuring they are secure and taut. Place the top strap as high as possible up the chimney. 

Finally, attach the mast securely to the straps and check that it is properly balanced. 

2. Installing a chimney mast 10 feet below your chimney: 

Begin by measuring and marking points on the chimney 24 inches apart. Attach straps at each point, so they’re tight and secure.

Install an anchor in a strong support structure at least 10 feet below your chimney before attaching the mast securely to it with your straps. 

Ensure you have adequate clearance for smoke to pass freely through, and check that your installation is stable before use.

What are the Advantages of Having a Chimney Mount?

The biggest advantage of having a chimney mount is that it provides better signal reception than ground-based antennas since it is higher up off the ground and has fewer obstructions blocking its signal path.

Additionally, they are relatively easy to install compared to roof-mounted installations and adjustable so that you can adjust them for optimal signal reception at any time after installation.

Finally, they are multipurpose — you can use them for TV antennas, HAM antennas, or even satellite dishes.

Chimney holder for mounting a satellite dish on the chimney

Chimney holder for mounting a satellite dish on the chimney

How to Choose an Antenna Chimney Mount?

1. Consider the Features of Antenna Chimney Bracket Mounts

Sturdy metallic construction, weather-resistant, and corrosion-resistant coatings or materials, adjustable vertical height and width, rotating head feature if necessary, and ease of installation. Make sure to choose one that best suits your needs.

2. Look for Affordable Options that Offer Good Value for Money

Many companies offer standard models at affordable prices; compare features and purchase prices to find an antenna chimney mount that meets your needs without breaking the bank.

3. The Type of Chimney You Have is Important When Choosing an Antenna Chimney Mount

Suppose you have a masonry chimney with a metal liner. In that case, you will need to purchase one designed specifically for masonry chimneys with metal liners to properly secure the structure. However, if your chimney is brick or stone without a metal liner, a universal mount may be suitable for securely mounting your antenna on the side of the structure.

4. Items Used in Antenna Chimney Mounts

1. Y brackets: Y brackets are metal brackets to attach an antenna mast to a chimney. 

2. Masts are vertical supports used to raise an antenna above the roofline. They are typically made of metal or fiberglass and range in height from 10 to 30 feet. 

3. Strap kits: Strap kits secure an antenna mast to a chimney. They typically include nylon straps and ratchet clamps.

Chimney-mounted antenna

Chimney-mounted antenna


As we’ve seen from this blog post, having a reliable and secure chimney mast mount can bring many benefits. This includes improved signal reception through antennas and dishes and easier installation than other methods.

So if you’re looking for an effective way of installing TV antennas or HAM radios/satellite dishes, then opting for a good quality chimney strap could be just what you need. We hope this article was helpful; contact us if you have more questions.

Leave a Comment